--- name: unifly version: "0.9.1" description: >- This skill should be used when the user asks to "manage UniFi devices", "configure UniFi networks", "create a VLAN", "provision an SSID", "create firewall rules", "reorder firewall policies", "create a NAT rule", "set up port forwarding", "configure masquerade NAT", "add DNS records", "manage traffic matching lists", "create DHCP reservations", "list DHCP reservations", "block a client", "kick a client", "find a client by IP or name", "adopt a device", "restart a UniFi device", "cycle a PoE port", "upgrade device firmware", "run a speed test", "stream UniFi events", "watch real-time events", "query UniFi stats", "analyze DPI traffic", "enable DPI", "generate hotspot vouchers", "show network topology", "audit firewall policies", "create a backup", "call the raw UniFi API", "check network health", or any task involving UniFi network infrastructure management via the unifly CLI. Also triggers on mentions of unifly, UniFi, Ubiquiti, UDM, UCG, USG, USW, UAP, UXG, UNVR, U6, U7, or UniFi controller operations. --- # unifly: UniFi Network Management unifly is a Rust CLI for managing Ubiquiti UniFi network infrastructure. It unifies the modern Integration API (REST, API key), the Session API (cookie plus CSRF), and Site Manager cloud APIs behind a single coherent interface, plus real-time WebSocket event streaming. 28 top-level commands cover devices, clients, networks, WiFi, firewall policies and zones, NAT policies, ACLs, DNS, traffic matching lists, hotspot vouchers, DPI, stats, backups, cloud fleet queries, and a raw API escape hatch. Unique capabilities worth leading with when the user's task suits them: - **Dual-API enrichment** merges Integration and Session data (e.g. client bytes, hostnames, uplink MACs only exist in the Session API; configuration CRUD only exists in Integration). On UniFi OS, API key mode can already reach session HTTP; Hybrid adds the WebSocket session for live monitoring. - **Real-time event streaming** via `unifly events watch` over WebSocket. - **Firewall policy reordering** via `reorder --get` / `reorder --set` for deterministic, round-trippable ordering edits. - **`unifly api` raw passthrough** for endpoints unifly does not wrap. - **Multi-profile** (`-p home`, `-p office`) for managing multiple controllers from one command line. ## Prerequisites Verify availability before running any command: ```bash command -v unifly >/dev/null 2>&1 && unifly --version || echo "unifly not installed" ``` If unifly is not installed, prefer `brew install hyperb1iss/tap/unifly` on macOS or `cargo install --git https://github.com/hyperb1iss/unifly.git unifly` elsewhere. After install, run `unifly config init` for a local controller or `unifly config cloud-setup` for Site Manager. See `examples/config.toml` for manual configuration. ## Authentication Modes unifly supports four modes. **API key mode is enough for most HTTP automation on UniFi OS controllers.** Choose **Hybrid** when the task needs live WebSocket features (`events watch`) or you want maximum compatibility. | Mode | Credentials | What It Unlocks | | ------------- | ----------------------- | ------------------------------------------------------------------------------------------------------------ | | `integration` | API key | Integration API plus session HTTP on UniFi OS: CRUD, device commands, stats, reservations, admin, event list | | `session` | Username + password | Session HTTP + WebSocket only: events watch, stats, device commands, DPI control, admin, backups | | `hybrid` | API key + username/pass | Everything above, including session WebSocket plus enriched records with maximum controller compatibility | | `cloud` | Site Manager API key | Connector-routed Integration CRUD plus `unifly cloud` fleet commands against `api.ui.com` | Session WebSocket still rejects API keys, so `events watch` needs `session` or `hybrid`. Cloud mode does **not** expose Session API endpoints or WebSocket streaming. For the complete command-to-API gate matrix (which commands require which auth mode), consult `references/concepts.md`. ## Command Inventory All commands follow `unifly [global-flags] [args]`. | Command | Aliases | Actions | | --------------- | ---------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | `devices` | `dev`, `d` | list, get, adopt, remove, restart, locate, port-cycle, ports, ports-export, port-set, stats, pending, upgrade, provision, speedtest, tags | | `clients` | `cl` | list, find, get, roams, wifi, authorize, unauthorize, block, unblock, kick, forget, reservations (`res`), set-ip, remove-ip | | `cloud` | | hosts [get], sites, switch, devices, isp [query], sdwan [get, status] | | `networks` | `net`, `n` | list, get, create, update, delete, refs | | `wifi` | `w` | list, get, neighbors, channels, create, update, delete | | `firewall` | `fw` | policies {list, get, create, update, patch, delete, reorder}, zones {list, get, create, update, delete}, groups {list, get, create, update, delete} | | `nat` | | policies {list, get, create, update, delete} | | `acl` | | list, get, create, update, delete, reorder | | `dns` | | list, get, create, update, delete | | `traffic-lists` | | list, get, create, update, delete | | `hotspot` | | list, get, create, delete, purge | | `events` | | list, watch | | `alarms` | | list, archive, archive-all | | `stats` | | site, device, client, gateway, dpi | | `dpi` | | apps, categories, status, enable, disable | | `topology` | `topo` | _(no subcommands)_ | | `system` | `sys` | info, health, sysinfo, backup {create, list, download, delete}, reboot, poweroff | | `settings` | | list, get, set, export | | `sites` | | list, create, delete | | `admin` | | list, invite, revoke, update | | `wans` | | list | | `vpn` | | servers {list, get}, tunnels {list, get}, status, health, site-to-site {list, get, create, update, delete}, remote-access {list, get, create, update, suggest-port, download-config, delete}, clients {list, get, create, update, delete}, connections {list, get, restart}, peers {list, get, create, update, delete, subnets}, magic-site-to-site {list, get}, settings {list, get, set, patch} | | `radius` | | profiles | | `countries` | | _(no subcommands)_ | | `api` | | Raw API passthrough (GET/POST/PUT/PATCH/DELETE any path) | | `config` | | init, cloud-setup, show, set, profiles, use, set-password | | `tui` | | _(no subcommands)_ | | `completions` | | bash, zsh, fish, powershell, elvish | For flag details and gotchas, consult `references/commands.md`. Every entity command accepts `--help` at runtime as the authoritative reference. ## Output Formats All list and get commands accept `--output` / `-o`: | Format | Flag | Use Case | | -------------- | ----------------- | ------------------------------------- | | `table` | `-o table` | Human display (default) | | `json` | `-o json` | Agent processing, pipe to `jq` | | `json-compact` | `-o json-compact` | Single-line JSON for scripting | | `yaml` | `-o yaml` | Config file output | | `plain` | `-o plain` | One ID per line for `xargs` pipelines | **Default for agent use: `-o json`.** Emit structured output, pipe through `jq`, and only fall back to `table` when the result is being shown to a human. ## Power Patterns These patterns unlock unifly's most distinctive capabilities. For full recipes with runnable shell scripts, consult `references/workflows.md`. ### `--from-file` for complex create/update Most entities accept `--from-file ` (or `-F`) instead of flag salad: `networks`, `wifi`, `firewall policies`, `firewall zones`, `firewall groups`, `nat policies`, `acl`, `dns`, `traffic-lists`, `hotspot`, `vpn site-to-site`, `vpn remote-access`, `vpn clients`, `vpn peers`, `vpn settings patch`, and `devices port-set` (JSONC for switch port config-as-code). Construct the JSON payload, validate it, then apply. See `examples/` for payload templates. ```bash unifly networks create -F examples/network-iot-vlan.json unifly firewall policies create -F examples/firewall-block-iot.json ``` ### Real-time event streaming ```bash # All events unifly events watch # Filter by EventCategory (case-insensitive): Device, Client, Network, # System, Admin, Firewall, Vpn, Unknown unifly events watch --types "Firewall,Admin" # JSON stream for piping into alerting unifly events watch --types Client -o json | jq -c 'select(.severity == "warning")' ``` ### Firewall policy reorder (round-trippable) ```bash # Read current order for a zone pair unifly firewall policies reorder --source-zone --dest-zone --get # Write back an explicit order unifly firewall policies reorder --source-zone --dest-zone \ --set ",," ``` ### Raw API escape hatch For endpoints unifly does not wrap (including UniFi v2 routes and Integration paths), use `unifly api`. It routes through the Session client, so CSRF token management and session caching are automatic. ```bash unifly api "v2/api/site/default/traffic-flow-latest-statistics" unifly api "cmd/stamgr" -m post -d '{"cmd":"kick-sta","mac":"aa:bb:cc:dd:ee:ff"}' unifly api "api/s/default/set/setting/teleport" -m put -d '{"enabled":true}' ``` ### Session API VPN payloads and settings `unifly vpn site-to-site` wraps Session API `rest/networkconf` records whose `purpose` is `site-vpn`. This is the current CRUD path for manual IPsec and OpenVPN site-to-site records exposed by the controller. ```bash unifly vpn site-to-site list -o json unifly vpn site-to-site get -o json unifly vpn site-to-site create -F site-to-site.json unifly vpn site-to-site update -F site-to-site.json unifly vpn site-to-site delete ``` `unifly vpn remote-access` wraps Session API `rest/networkconf` records whose `purpose` is `remote-user-vpn`. This is the current CRUD path for L2TP, OpenVPN, and WireGuard remote-access servers exposed by the controller. ```bash unifly vpn remote-access list -o json unifly vpn remote-access get -o json unifly vpn remote-access create -F remote-access.json unifly vpn remote-access update -F remote-access.json unifly vpn remote-access suggest-port -o json unifly vpn remote-access download-config --path . unifly vpn remote-access delete ``` `unifly vpn clients` wraps Session API `rest/networkconf` records whose `purpose` is `vpn-client`. This is the current CRUD path for configured OpenVPN and WireGuard client profiles exposed by the controller. ```bash unifly vpn clients list -o json unifly vpn clients get -o json unifly vpn clients create -F vpn-client.json unifly vpn clients update -F vpn-client.json unifly vpn clients delete ``` `unifly vpn peers` wraps the Session v2 API WireGuard peer endpoints for remote-access VPN servers. `list` can enumerate all peers or scope to a single server ID; `create`, `update`, and `delete` require the parent remote-access server ID. ```bash unifly vpn peers list -o json unifly vpn peers list -o json unifly vpn peers get

-o json unifly vpn peers create -F peer.json unifly vpn peers update

-F peer.json unifly vpn peers delete

unifly vpn peers subnets -o json ``` `unifly vpn connections` wraps the Session v2 API VPN client connection inventory exposed at `v2/api/site//vpn/connections`. `restart` issues the same controller action the web UI uses for a single connection. ```bash unifly vpn connections list -o json unifly vpn connections get -o json unifly vpn connections restart ``` `unifly vpn magic-site-to-site` wraps the Session v2 API `magicsitetositevpn/configs` inventory endpoint. It is currently read-only. ```bash unifly vpn magic-site-to-site list -o json unifly vpn magic-site-to-site get -o json ``` `unifly vpn settings` wraps the Session API `rest/setting` records for the VPN feature toggles the controller exposes today: `teleport`, `magic-site-to-site-vpn`, `openvpn`, and `peer-to-peer`. ```bash unifly vpn settings list -o json unifly vpn settings get peer-to-peer -o json unifly vpn settings set teleport --enabled true unifly vpn settings patch peer-to-peer -F peer-to-peer.json ``` `site-to-site get`, `remote-access get`, `clients get`, `connections get`, `peers get`, and `magic-site-to-site get` return redacted records with summary fields and the sanitized controller payload under `fields`. `settings get` returns a redacted wrapper with `key`, `enabled`, and `fields`. `patch` accepts either the raw session setting body or that wrapper shape and will send the inner `fields` object back to the controller. ### Bulk operations via filter DSL `hotspot purge --filter` accepts the Integration filter DSL for bulk deletion without ID iteration: ```bash unifly hotspot purge --filter "status.eq('UNUSED')" unifly hotspot purge --filter "name.contains('Conference')" ``` ### TUI handoff for human verification Propose a change, let a human visually confirm in the TUI before committing: ```bash # Agent inspects, proposes. Human runs unifly tui and verifies on # screen 4 (Networks) or 5 (Firewall) before the agent applies the change. unifly tui ``` ### Multi-profile targeting ```bash unifly -p home devices list unifly -p office firewall policies list UNIFI_PROFILE=warehouse unifly system health ``` ## Essential Gotchas 1. **Default list limit is 25.** The CLI prints a truncation hint when results hit the default. For enumeration, always pass `--all` or `--limit 200` (or higher). 2. **Environment variables use the `UNIFI_` prefix, not `UNIFLY_`.** Relevant vars: `UNIFI_URL`, `UNIFI_API_KEY`, `UNIFI_USERNAME`, `UNIFI_PASSWORD`, `UNIFI_SITE`, `UNIFI_PROFILE`, `UNIFI_OUTPUT`, `UNIFI_INSECURE`, `UNIFI_TIMEOUT`, `UNIFI_TOTP`. The only `UNIFLY_*` var is `UNIFLY_THEME` for the TUI. 3. **`--yes` / `-y`** skips confirmation prompts for mutations. Required for non-interactive use. 4. **API key mode covers most commands** on UniFi OS, including Session API endpoints (stats, device commands, Wi-Fi observability, client enrichment). Use **Hybrid only when live WebSocket streaming is needed** (`events watch`, TUI live refresh). Client and device enrichment fields work in API key mode. 5. **Cloud support is Integration-only.** `unifly cloud ...` talks to Site Manager and `auth_mode = "cloud"` routes Integration-backed commands through the connector, but Session-only features still need direct controller access. 6. **Exit codes are meaningful.** `0` on success, non-zero on error. Capture stderr for diagnostics. ## Agent Workflow 1. Verify the tool exists with `command -v unifly`. 2. Check auth mode with `unifly config show` before running commands that require Session or Integration specifically. 3. Run `unifly system health -o json` as the first touch to confirm connectivity. 4. Inspect before mutating: `list` / `get` the entity first, capture IDs. 5. For complex creates, write a JSON payload and use `--from-file`. 6. After mutations, re-fetch the entity with `get` to confirm state. 7. For irreversible operations (delete, reboot, poweroff), surface a summary to the user before running even with `--yes`. ## Additional Resources ### Reference Files - **`references/commands.md`**: Per-command flag reference with gotchas (non-obvious flags, dual-API boundaries, correct argument forms) - **`references/concepts.md`**: UniFi networking concepts, dual-API gate matrix, auth decision tree, environment variables, platform config paths, MFA/TOTP, error taxonomy - **`references/workflows.md`**: Runnable automation recipes (event streaming, safe firewall reorder, bulk DHCP reservations, ad-blocking via DNS policies, cafe voucher flow, incident response) ### Example Files - **`examples/config.toml`**: Multi-profile config template - **`examples/network-iot-vlan.json`**: VLAN creation payload for `--from-file` - **`examples/firewall-block-iot.json`**: Firewall policy payload - **`examples/nat-masquerade.json`**: NAT masquerade policy payload - **`examples/nat-port-forward.json`**: Destination NAT (port forward) payload - **`examples/wifi-iot.json`**: WiFi SSID payload - **`examples/vpn-remote-access-wireguard.json`**: WireGuard remote-access VPN payload - **`examples/vpn-site-to-site-ipsec.json`**: IPsec site-to-site tunnel payload - **`examples/vpn-client-openvpn.json`**: OpenVPN client payload - **`examples/vpn-wireguard-peer.json`**: WireGuard peer configuration payload

Unifly

Description

Latest Changes

Install Unifly with One Click