--- name: reefbeat description: Control and monitor Red Sea ReefBeat aquarium equipment directly over the local HTTP API — no cloud required. Supports ALL actions on ALL devices — ReefLED G1/G2 (lighting/kelvin/intensity/schedules/acclimation/moonphase), ReefDose (dosing/calibration/priming/supplements), ReefMat (filter roll/advance/new-roll), ReefRun (return pump + skimmer control/overskimming), ReefATO+ (auto top-off/resume/volume), ReefWave (wave modes/preview). Use for ANY reef tank / aquarium request. --- # ReefBeat Skill Direct HTTP control for Red Sea ReefBeat devices. Full API reference in `references/api.md`. ## Quick Start ```bash python3 scripts/reefbeat.py discover /24 # find all devices python3 scripts/reefbeat.py info # device info + type python3 scripts/reefbeat.py status # /dashboard python3 scripts/reefbeat.py get /endpoint python3 scripts/reefbeat.py post /endpoint '{"key":"value"}' python3 scripts/reefbeat.py put /endpoint '{"key":"value"}' ``` ## Device Discovery Run discovery to find all devices on your network automatically: ```bash python3 scripts/reefbeat.py discover /24 ``` --- ## Common Actions by Request ### ReefLED — Lighting ```bash # Check current light status python3 scripts/reefbeat.py get /manual # Set white/blue (G1 — RSLED90) python3 scripts/reefbeat.py post /manual '{"white": 60, "blue": 80}' # Timed manual (30 min then resume schedule) python3 scripts/reefbeat.py post /manual '{"white": 60, "blue": 80, "duration": 30}' # Toggle moonphase python3 scripts/reefbeat.py post /moonphase '{"enabled": true, "moon_day": 14}' # Acclimation python3 scripts/reefbeat.py post /acclimation '{"enabled": true, "duration": 50, "start_intensity_factor": 30}' # View auto schedule for Monday (day 1) python3 scripts/reefbeat.py get /auto/1 # Turn LED off / resume schedule python3 scripts/reefbeat.py delete /off ``` ### ReefRun — Pumps / Skimmer ```bash # Check pump status python3 scripts/reefbeat.py status python3 scripts/reefbeat.py get /pump/settings # Turn pump on/off (schedule_enabled controls this) python3 scripts/reefbeat.py put /pump/settings \ '{"pump_2": {"id":2,"name":"skimmer","type":"skimmer","model":"rsk-300","sensor_controlled":true,"schedule_enabled":false,"schedule":[{"st":0,"ti":0,"pd":0}]}}' # Change return pump intensity to 70% python3 scripts/reefbeat.py put /pump/settings \ '{"pump_1": {"id":1,"name":"Return pump","type":"return","model":"return-6","sensor_controlled":false,"schedule_enabled":true,"schedule":[{"st":0,"ti":70,"pd":0}]}}' # Toggle over-skimming protection python3 scripts/reefbeat.py put /pump/settings \ '{"overskimming": {"enabled": true, "threshold": 10}}' ``` ### ReefATO+ — Auto Top-Off ```bash # Check ATO status (level, temp, fills) python3 scripts/reefbeat.py status python3 scripts/reefbeat.py status # Resume after malfunction/pump_timeout python3 scripts/reefbeat.py post /resume # Enable/disable auto-fill python3 scripts/reefbeat.py put /configuration '{"auto_fill": true}' # Manual fill / stop python3 scripts/reefbeat.py post /manual-pump python3 scripts/reefbeat.py post /stop # Set reservoir volume (mL) python3 scripts/reefbeat.py post /update-volume '{"volume": 10000}' ``` ### ReefMat — Filter Roll ```bash # Check roll status python3 scripts/reefbeat.py status # aquarium 1 mat python3 scripts/reefbeat.py status # aquarium 2 mat # Advance roll manually python3 scripts/reefbeat.py post /advance # Register new full roll (ReefMat250 — max diameter 11.1cm) python3 scripts/reefbeat.py post /new-roll \ '{"external_diameter": 11.1, "name": "New Roll", "thickness": 0.3, "is_partial": false}' # Register started roll python3 scripts/reefbeat.py post /new-roll \ '{"external_diameter": 8.5, "name": "Started Roll", "thickness": 0.3, "is_partial": true}' # Toggle auto-advance python3 scripts/reefbeat.py put /configuration '{"auto_advance": true}' ``` ### ReefWave — Wave Pump ```bash # Check wave status python3 scripts/reefbeat.py status # Start preview mode (alternating, 5min fwd/5min back, 80% intensity, 5min total) python3 scripts/reefbeat.py post /preview \ '{"type":"st","frt":5,"rrt":5,"fti":80,"rti":80,"duration":300000,"sn":5,"pd":10}' # Stop/save preview python3 scripts/reefbeat.py delete /preview ``` ### Shortcuts (All Devices) ```bash # Start feeding mode python3 scripts/reefbeat.py post /maintenance # or /emergency # End maintenance python3 scripts/reefbeat.py delete /maintenance ``` --- ## Network Behaviour - **Auto-discovery** (`discover` command) opens a UDP socket to `8.8.8.8` (no data sent — standard technique to detect the local network interface), then actively probes all hosts in the subnet via HTTP `/device-info` and `/description.xml`. This is local-only after the interface detection step. - No cloud authentication or external API calls are made by this skill. - All device control is purely local HTTP (port 80, no auth). ## Notes - G1 LEDs (RSLED50/90/160): white + blue channels (0–100%) - G2 LEDs (RSLED60/115/170): kelvin (10000–20000) + intensity (0–100%) - ReefDose config requests can take 7–9s — normal - ReefWave local changes desync from app — expected - ATO `pump_timeout` / `malfunction` → POST `/resume` to clear - Always read `/pump/settings` before writing to preserve unchanged pump fields

ReefBeat

Description

Latest Changes

Install ReefBeat with One Click